Lean Logistic

The Spacer for profile 45x30 mm (code FIFO-EKV) is a positioning and spacing component designed for integration into FiFo stations within lean logistics systems. It ensures correct alignment and consistent spacing of structural profiles in picking and flow-rack configurations. Supplied in packs of 10 pieces, it supports modular assembly requirements typical of lean manufacturing environments.

The Rail Connector 45x50x30 mm (FIFO-PV) is an aluminium diecast connector weighing 29 g, designed for structural joining of rails in FiFo stations within lean logistics systems. The Ø 34 mm profile ensures guided insertion up to the central red line, providing precise and repeatable positioning. Available in packs of 10 pcs.

Short terminal FIFO rails are end-stop components designed for use with the FIFO Station rail system, available in Short Left and Short Right versions to ensure correct First In First Out material flow orientation. They integrate into internal logistics workstations to precisely define the terminal points of the rail. Supplied in packs of 10 pieces, they support efficient spare parts management and serial installations.

The Adapter FIFO Station 250 mm (code FIFO-ADAPTER) is a connection element designed to join FIFO lane sections in sequence, ensuring continuity and alignment in the flow of carriers. It integrates with the full range of FIFO rails available in the system's standard lengths. Supplied in packs of 5 pieces.

The Fixing Screw 6x40 mm set (code FIFO-SCHR-K) is a hardware kit designed for the assembly and installation of FiFo stations in lean logistics environments. Each pack contains 20 pieces, providing the fastening components required for a complete and standardised mounting process. The kit is included as a compatible fixing set for GF systems within the FiFo Station product line.

The Dual Terminal for FIFO rails (FIFO-EK-1) is an end-stop component designed for the FIFO Station rail system, compatible with standard rail lengths from 1200 to 3000 mm installed directly on the floor. It ensures correct First In First Out material flow management in internal logistics workstations, providing simultaneous double-side containment on the rail. It integrates into the modular system alongside single left and right terminals (FIFO-EK-2L, FIFO-EK-2R) to support flexible picking and line-feeding configurations.

Terminals for FIFO rails are end-stop components engineered to precisely define the boundaries of the sliding path within the FIFO Station rail system, ensuring correct First In First Out material flow orientation. Available in Left and Right versions, they integrate into internal logistics workstations to provide reliable and repeatable unit assignment.

The Steel terminal Monorail LiFo is an end-stop component designed for FiFo Monorail rail systems, available in 40 mm and 55 mm versions to suit different installation configurations. Its steel construction ensures structural durability in LiFo flow-controlled handling stations. Supplied individually (1 pc), it integrates into the LeanProducts Monorail accessories range for lean logistics applications.

The Non-return device with bolts (MONO-RLS) is designed for integration into FiFo stations and gravity roller systems, preventing reverse movement of loads and ensuring a controlled, unidirectional material flow along the conveying line. The bolted fixing provides a stable anchorage to the roller structure, eliminating the risk of unintended material rollback. Suitable for picking stations, feeding lines, and FIFO systems in lean logistics environments.

The Brake with brushes (MONO-BBR) is a FiFo station component designed to ensure low friction during product sliding. It allows rollers to be fixed on plates with a maximum thickness of 2 units, supporting mixed size configurations within the same setup. Suitable for integration into lean logistics systems requiring precise material flow control.

The Rail Jointing Element (MONO-SV-100) is designed to connect and extend rail sections within FIFO stations and lean logistics environments. Its circular cross-section and compatibility with the Green Frame 45° joint range ensure versatile integration across manufacturing and logistics applications. Supplied in packs of 10 pieces.

The Side Mounting Plate (cod. MONO-HB) enables secure fastening of the Green Frame to walls or flat surfaces with a maximum thickness of 2 mm, ensuring controlled mobility and stability in industrial environments. Designed for fixing rollers onto plates, it serves as a key component in the assembly of FiFo stations within lean logistics layouts. Supplied in a pack of 2 pieces.

The terminal bump protection (set of 2 pcs + screws) is designed to shield FiFo station terminals from mechanical impacts and stresses common in industrial logistics environments. The set includes two guards with all necessary screws for direct and secure installation. Compatible with lean logistic system configurations, it helps extend structural service life and reduce maintenance downtime.

The Binario FIFO Station is a modular rail component designed for First In First Out material flow management in internal logistics, available in four standard lengths: 1200, 1800, 2400 and 3000 mm. The rails install directly on the floor and are compatible with dedicated left, right and double end stops (FIFO-EK-2L, FIFO-EK-2R, FIFO-EK-1) and a 6×40 mm fixing screw set. The rail profile geometry facilitates smooth cart entry, ensuring a consistent and repeatable FIFO flow. The system supports integration with Visual Management information boards for clear unit assignment.

The FIFO Monorail Individuale - set 2 binari con staffe is a floor-mounted rail system for FIFO load unit management, available in 1200, 1800 and 2400 mm lengths and configurable to custom widths. The 2-piece set includes rails, mounting brackets and fixing hardware (M6x12 pan-head bolts and M6 hammer nuts), enabling direct floor installation without special tooling. Compatibility with the connection plate and MONO-STOP accessories allows straightforward integration into larger FIFO Monorail stations.

The FIFO Monorail 40/55 mm Connecting Plate joins FIFO Monorail tracks compatible with both 40 mm and 55 mm profiles, ensuring alignment and flow continuity within the rail system. Available in 400 mm and 800 mm lengths, supplied in packs of 2 pieces, each pack includes 2 round-head bolts M6x12 and 2 hammer nuts M6 for tool-ready installation. The plate integrates directly into the FIFO Monorail ecosystem supporting custom-width lean logistic stations.

The FIFO Monorail 55 mm is a structural rail element for gravity-fed FIFO stations, available in lengths of 1200, 1800 and 2400 mm with a 55 mm width. Designed for custom-width lean logistics systems, it is compatible with the full range of common Monorail accessories including end stops, connecting plates and steel terminators for LIFO Monorail applications. Supplied in packs of 5 pieces, it enables modular and scalable configuration of picking and line-feeding stations.

The FIFO Monorail 40 mm Connection Plates allow joining of 40 mm monorail track segments to build FIFO stations with custom widths. Available in two lengths (400 mm and 800 mm), each pack contains 2 plates and includes 2 M6×12 round-head bolts and 2 M6 hammer nuts for straightforward, tool-ready assembly. An essential component for configuring modular lean logistics rail systems adapted to specific production layout requirements.

The Binario FIFO Monorail 40 mm is a structural rail element for customizable-width FIFO stations, available in 1200, 1800, and 2400 mm lengths to suit a range of lean logistics layouts. Supplied in packs of 5 pieces, it is fully compatible with the complete Monorail 40 mm accessory range — including plastic or aluminium end stops, connecting plates, and retaining stops — enabling modular, gravity-flow lane assemblies. The 40 mm profile ensures compatibility with standard carts and containers used in lean production and warehouse material flows.

The LL Taxi Trolley (LP-KCL31) is a 3-tier trolley in Plywood Deck version with deck 1200×800 mm, designed for internal logistics in lean manufacturing environments. The load capacity is 500 kg, distributed over three levels to optimize material flow along the line. Mobility is guaranteed by 4 swivel wheels in polyamide Ø 200 mm, of which 2 with brake, for stable and controlled positioning at workstation.