Tension spring for Green Frame systems, available in eight load variants (Light S/M, Medium S/M/L, Heavy S/M/L) to suit configurations with different tension requirements. Designed as an accessory component to ensure proper operation and structural stability in lean manufacturing modular assemblies. Selecting the correct variant based on the applied load ensures optimal performance and long service life.

The Complete N-type Hinge is a full hinge assembly designed for the Green Frame GF-N Ø 28 mm modular system, available in left and right-hand versions to suit the required door opening direction. Weighing 144 g, the kit includes M6×12 low head bolts and T-Nut L/M6 for mounting on Green Frame vertical door frames. Suitable for integration into Ø 28 mm tubular frame structures used in visual management and industrial guarding applications.

The Complete Hinge for Panels N/G is an accessory designed for the Green Frame GF-N system with Ø 28 mm tubes, available in left- and right-hand versions to suit different mounting configurations. It enables controlled opening and closing of panels within lean structures, ensuring direct integration with the GF-N system without additional adapters.

The M16 G conductive foot connector is a nylon component for the Green Frame adjustable levelling system, available in Standard (GFN-E05, 68 g) and ESD (GFN-E21, 78 g) versions for electrostatic discharge-controlled environments. Compatible with Ø 50 mm M16 threaded feet; M12 fixing is supported via the optional M12 adapter (LP-A001, sold separately). Designed for levelling and stabilising modular structures in manufacturing and logistics applications.

The Wheel Fixing Bracket N is an accessory for the Green Frame GF-N modular system (Ø 28 mm tubes), designed to mount wheels onto industrial modular structures. Available in Type A (GFN-C08, 269 g) and Type B (GFN-C09, 223 g), it is compatible with the M12 threaded insert designed for the GF-N system. Suitable for carts, workbenches, and lean assembly stations requiring controlled mobility.

The Cutting Stopper with built-in spring for heavy loads is a Green Frame GF-N Ø 28 mm series component designed to stop and control the movement of sliding structures in demanding applications. With a 750 N load capacity — twice that of the standard Hinge Connector Stopper — it is suited for gravity flow lanes and workstations subject to high mechanical stress. Available in left and right versions (weight: 570 g, GF frame excluded), it integrates directly into the modular Green Frame system.

Hinge Connector S and Hinge Connector Stopper S are mobile joint elements for the Green Frame GF-S Ø 19 mm system, designed to enable rotating and sliding connections in lean structures. The Connector version (GFJ-A67, 7 g) provides a load capacity of 750 N, twice that of the Stopper version (GFJ-A64, 12 g). The Stopper variant locks the joint in place once the desired position is reached. Both variants integrate natively into the GF-S system for building workstations, carts, and dynamic structures.

The C10 S Plastic Bayonet Connector is a plastic bayonet connector designed for the Green Frame GF-S modular system with Ø 19 mm tubing. Available in Version Type A and Type B to suit different structural configurations, with a lightweight design at 5.6 g. Suitable for building lightweight structures in lean manufacturing and visual management environments.

The G Bumper is a mobile element from the Green Frame GF-G line, compatible with Ø 43 mm profiles. Available in four colours (red, blue, yellow, light grey), it enables quick visual coding within visual management systems. Weighing just 7 g, it integrates seamlessly without adding load to existing lean structures.

Protezione N is an accessory designed for the Green Frame Ø 28 mm tube-and-joint system (GF-N profile). Available in four colours (red, blue, yellow, light grey) and weighing just 4 g, it supports visual management through colour-coded identification of structural elements. It protects specific points or ends within the GF-N system, contributing to workplace organisation and safety.

Hook for C10 is an accessory for the modular Green Frame GF-N Ø 28 mm system, designed for hanging and organising elements on tubular structures. Available in two versions — Type J (5 g) and Type U (4 g) — to suit different fastening and visual management requirements. Suitable for lean workstations, industrial trolleys and shelving units where organised material flow and visual order are essential.

The Slide Connector S (GFJ-B81) is a sliding connector for the Green Frame GF-S Ø 19 mm system, designed for mobile elements in lean assembly structures. It ensures compatibility with GF-N (Ø 28 mm) and GF-G (Ø 43 mm) profiles, allowing integration between different pipe diameters within the same installation. Fastening is achieved via M5 screw, providing a secure and repositionable joint to adapt to changing production layouts.

The Sliding Connector L N (GFJ-B29) is a linear sliding component designed for Green Frame modular systems, compatible with GF-N Ø 28 mm and GF-G Ø 43 mm profiles. Made from extruded aluminium and resin, it weighs 48 g and enables guided linear movement of sub-assemblies within lean workstations, assembly lines, or industrial carts. Its L-shaped geometry suits angular configurations where controlled sliding along Green Frame profiles is required.

The Rotating/Sliding Connector N is an anodized aluminium connector for the 28 mm GF-N Green Frame modular system, designed to create rotating or sliding joints in lean manufacturing structures. Available in Standard and Reinforced versions, it supports radial loads up to 450 N and thrust loads up to 750 N, with an axial load capacity of 400 N. Its 31 g weight makes it suitable for ergonomic workstations and industrial mobile carts. Compatible with the dedicated Locking Mechanism for Rotating/Sliding Connector N for fixed-position locking.

The Connector Mounting N/G is a 21 g extruded aluminium accessory designed to connect Green Frame GF-N (Ø 28 mm) and GF-G (Ø 43 mm) tube systems. Available in vertical and horizontal versions, it enables flexible structural configurations for modular carts and workstations to suit different layout requirements. Its low weight and extruded aluminium construction make it well suited for integration into lightweight structures used in lean manufacturing and visual management applications.

The S Slot Connector - N is a die-cast aluminium joint designed for the GF-N Ø 28 mm profile system within the Green Frame modular range. Available in versions C8 (GFA-603, 19 g) and C10 (GFA-607, 25 g), it ensures compatibility with square profiles of the GF-N series and supports the assembly of modular structures for lean workstations and visual management applications. Its low weight and aluminium construction make it suitable for configurations requiring both lightness and structural integrity.

The internal/external hinge for the Green Frame system is made of anodized aluminum (129 g) and enables articulation of panels and structures within GF-N Ø 28 mm profiles. Available in left and right versions, it ensures compatibility with GF-N (28 mm) and G (43 mm) profiles. A dedicated accessory for modular configuration of lean workstations and industrial structures.

The M12 Threaded Insert is an accessory for the Green Frame GF-N Ø 28 mm modular system, designed to connect levelling feet and wheels to industrial tubular structures. Available in Standard version (Polyamide 6, 1250 N load capacity) and ESD version (ABS Resin, 1200 N load capacity), weighing 23 g and 21 g respectively. The ESD variant is suitable for production environments requiring electrostatic discharge protection. Compatible with wheel fixing for light-load trolleys within the GF-N system.

The Parking Brake with Pedal is an accessory for Green Frame GF-N Ø 28 mm structures, designed to securely lock mobile workstations and trolleys in position. Available in three versions (Type 75/100, Type 100, Type 150) with load capacities up to 300 kg and weights starting from 528 g, it integrates directly with the GF-N levelling feet and wheels system. Foot-operated actuation allows locking and unlocking without using the hands, improving operational safety and workflow efficiency.

The Locking Mechanism for Rotating/Sliding Connector N secures and stabilizes the GF-N Ø 28 mm rotating/sliding connector within Green Frame structures, preventing unintended movement once the desired position is set. Available in Standard (GFJ-A09, 21 g) and Reinforced (GFJ-A61, 33 g) versions, it is manufactured in anodized aluminum for durability and reduced weight in industrial workstation and material handling applications.