The Pudu MT1 MAX Outdoor Sweeping Cleaning Robot is designed for hard surfaces in complex outdoor environments such as parking lots and external areas up to 25,000 m², with maximum coverage of 2,200 m²/h in standard mode and 7,000 m²/h in spot mode. The 700 mm working width, combined with SLAM VSLAM + Lidar navigation, ensures precise autonomous paths in spaces with minimum passage of 750 mm. With autonomy up to 8 hours (depending on operating mode) and recharge time under 3.5 hours, the robot supports continuous operational shifts; the 35 L waste container reduces interruptions for emptying. Recharging is available in both wired mode and autonomous mode via recharging station (sold separately).

The Pudu MT1 VAC Cleaning Robot Sweeping and Vacuuming is an autonomous robot for hard floors with a working width of 700 mm and cleaning speed up to 1,400 m²/h, operational in three modes: sweeping, vacuuming, and dust mop. Navigation is managed through SLAM VSLAM systems combined with Lidar for precise adaptive pathfinding in industrial and commercial environments. With autonomy ranging from 3 to 6.5 hours depending on the selected mode and recharge time under 3.5 hours — via cable or autonomous charging station (sold separately) — the robot ensures operational continuity during cleaning shifts. The dual collection capacity (dust bags 14 L total + dustbin 6 L) and passage space of 750 mm make it suitable for contexts with narrow corridors and prolonged cleaning cycles.

The EZL 1000B scissor lift trolley provides battery-powered lifting of loads up to 1,000 kg for industrial and logistics environments. The 12V 40Ah battery drive delivers autonomous operation, with an 820 mm lift stroke starting from a minimum height of 320 mm across a 1,300 × 800 mm work platform — supporting a wide range of ergonomic material handling tasks. CE certified to EN 1570-1.

The EZD 500B scissor lift trolley is designed for industrial lifting operations requiring full mobility without dependency on mains power: the 12V 28Ah battery drive ensures autonomous use across the shop floor. With a 500 kg load capacity, a 900×800 mm work platform and a 1100 mm lift stroke (minimum height 410 mm), it covers a wide ergonomic range for load positioning. CE certified to EN 1570-1, it complies with European standards for lift tables.

The EZ 1001B scissor lift trolley is a battery-powered lifting solution (12V 28Ah) with a 1,000 kg load capacity, 900×800 mm work platform, and 600 mm lift stroke (minimum height 300 mm). Designed for industrial and intralogistics environments requiring ergonomic load positioning at variable heights, it operates autonomously without external power supply. CE certified in accordance with EN 1570-1.

The TZD 203B is a battery-powered scissor lift trolley (12V 24Ah) designed for handling loads up to 200 kg in manufacturing and logistics environments. A 1170 mm lift stroke, 450 mm lowered height, and 900×600 mm work platform provide broad operational flexibility and ergonomically correct load positioning. Compared to the foot-pump variant, the electric drive reduces operator effort during high-frequency lifting cycles. CE certified to EN 1570-1.

The TZ 503B is a battery-powered scissor lift trolley (12V 24Ah) designed for industrial environments where manual load handling is not feasible. With a 500 kg capacity, a 900×600 mm platform, and a 600 mm lift stroke from a minimum height of 330 mm, it supports ergonomic load positioning along production lines. CE certified to EN 1570-1, ensuring compliance with European safety standards for lifting tables.

The TZD 203 scissor lift trolley is designed for industrial lifting tasks with a 200 kg load capacity and a 1170 mm lift stroke, starting from a minimum height of 450 mm. The 900×600 mm work platform and foot pump drive enable ergonomic operation without any electrical power source. CE certified to EN 1570-1, it is suitable for assembly stations, warehouses, and production lines where quick working height adjustment is required.

The TZ 503 is a scissor lift trolley with a 500 kg load capacity, a 900×600 mm work platform, and a 600 mm lift stroke (minimum height 330 mm), operated via foot pump. CE certified to EN 1570-1, it is designed for material handling and height-positioning tasks in industrial and logistics environments. The scissor mechanism ensures load stability throughout the lifting and lowering cycle, reducing operator physical effort.

The TZ 303 is a scissor lift trolley with a 300 kg load capacity, a 900×600 mm work platform, and a 600 mm lift stroke (minimum height 330 mm), operated by foot pump. Its 180 kg structural weight ensures stability in industrial material handling applications at variable working heights. CE certified to EN 1570-1, it is suitable for production and logistics environments where compliance with European safety standards for lift tables is required.

The CZ 503 is a scissor lift trolley with a 500 kg load capacity and 600 mm lift stroke, foot-pump driven for operation without electrical supply. The 900 × 600 mm work platform starts from a minimum height of 330 mm, making it suitable for assembly line feeding, ergonomic component positioning and general material handling in industrial environments. CE certified to EN 1570-1, it meets European safety standards for lifting tables.

The CZD 203 is a scissor lift trolley with a 200 kg load capacity, 1170 mm lift stroke and 450 mm lowest height, operated via foot pump. The 900 × 600 mm lift table supports ergonomic handling of components and materials in industrial and logistics environments. CE certified to EN 1570-1, it meets European safety standards for lifting equipment.

The CZ 203 is a scissor lift trolley with a 200 kg load capacity, a 900×600 mm work platform, and a 600 mm lift stroke starting from a minimum height of 330 mm. The foot pump drive requires no electrical supply, making it suitable for flexible deployment across production and logistics environments. Certified CE in accordance with EN 1570-1, it meets European safety standards for lift tables. Designed for ergonomic material handling, component positioning, and working height adjustment along assembly lines.

LLT 750 Logistic Train Arm is a lift-and-tilt table designed for integration into logistic train systems, offering a 750 kg capacity, 650 mm lift stroke, and a minimum height of 190 mm to support floor-level picking operations. The 1200 × 550 mm platform tilts up to -40° on the short side, equipped with a load restraint system H=230 mm for safe load handling. The internal power pack operates on three-phase 400V supply (0.95 kW S3), with a 14-second lift cycle controlled via a standard 4-button control unit. CE certified to EN 1570-1.

ARZ 1200 is an electrohydraulic lift arm designed for logistic trains in production areas without forklift access, with a 1200 kg load capacity and 550 mm lift stroke (minimum height 220 mm). The 1020×770 mm load platform features a lateral load restraint (H=230 mm) and short-side tilting from +5° to -40°, enabling ergonomic material unloading. The unit runs on three-phase 400V power with an internal power pack at 0.95 kW (S3), 15-second lift cycle and a standard 4-button control unit. CE certified to EN 1570-1.

ARZ 750 is a logistic train armlift rated at 750 kg capacity, with a 550 mm lift stroke and a minimum height of 220 mm, designed for direct integration into lineside milk-run flows. The 1300×550 mm platform tilts on the short side across a +5°/-40° range, supporting ergonomic unloading of load carriers. The internal power pack (0.55 kW S3 duty, 400V three-phase supply) and 4-button control unit deliver a 15-second lift cycle with no external hydraulic infrastructure. CE certified to EN 1570-1.

ALT 1500GB is a lift-and-tilt table (Armlift) rated for loads up to 1,500 kg, with an 820 mm lift stroke and a minimum height of 6 mm for floor-level loading. The 1,380 × 1,270 mm platform tilts on the long side from +5° to -40°, supporting ergonomic pick-and-place operations. The external power pack with plastic cover (3 m cable, 400 V three-phase supply, 0.95 kW S3) drives a 16-second lift cycle controlled by a standard 4-button panel. Certified CE to EN 1570-1.

The ALT 1500UE ArmLift is a lift-and-tilt table designed for industrial applications requiring both vertical lifting and load tilting on the short side. It handles up to 1500 kg with an 820 mm lift stroke and a 1380×850 mm work surface, offering a tilt range of +5° to -40° and a minimum floor height of just 6 mm for easy load positioning. Powered by an external three-phase 400V power pack (0.95 kW S3), it features a 4-button control unit, a load restraint (H=230 mm), and is CE certified to EN 1570-1.

The ALT 1500U ArmLift is a lift-and-tilt table designed for industrial handling of loads up to 1,500 kg. The 1,380 × 1,050 mm platform provides an 820 mm lift stroke with a minimum height of just 6 mm, while the short-side tilt mechanism allows inclination from +5° to -40° for controlled load discharge. The unit features an external power pack with plastic cover, three-phase 400V supply (0.95 kW S3 duty), a load restraint at H=230 mm, and a 16-second lift cycle; CE certified to EN 1570-1.

The ART 2200 ArmLift is a lift-and-tilt table with a 2,200 kg load capacity, 550 mm lift stroke, and a 1,100 × 1,300 mm work surface, designed for assembly and material handling stations in demanding industrial environments. The long-side tilt function (+5° / -40°) improves operator ergonomics and load accessibility, supported by an integrated load restraint (H=230 mm). The internal hydraulic power pack, powered by 400V three-phase supply, completes a full lift cycle in 24 seconds via a standard 4-button control unit. CE certified to EN 1570-1.